What the 720.025 v4 Replica Grand Complication Is
The 720.025 v4 is a fourth revision replica built to copy a grand complication style watch. In the replica market, "v4" is a version tag rather than a factory name. It tells you the build was revised at least three times before the current one. The 720.025 reference covers a multi function dial with a perpetual calendar layout, a moon phase, and in most builds a working chronograph. The genuine category it imitates packs several complications into one movement, which is why real pieces in that class cost six figures and take months to assemble by hand.
A replica at this level copies the layout, the case profile, and the surface finish. It does not copy the engineering. Knowing that difference is the whole basis of a smart purchase. Judge the 720.025 v4 as a watch that looks like a grand complication, then inspect it the way you would inspect any multi function watch.
fake grand complication 720.025 v7
What the v4 Revision Usually Changes
Version numbers in this market are loose, but v4 builds of a 720.025 layout tend to share a few updates over earlier runs.
fake grand complication 720.025 v7
- Subdial hands corrected to match the original proportions and hand shape.
- Thinner case profile, usually a 1 mm to 2 mm reduction from v2 and v3.
- Revised moon phase disc with a smoother gradient and sharper stars.
- Updated date and day apertures with cleaner cut edges.
- Improved caseback engraving depth and font weight.
- Movement plate decorated with Geneva stripes instead of plain brushing.
Ask the seller which of these the specific unit in stock actually has. A v4 label on a listing does not guarantee any of them.
Understanding the Fake Grand Complication 720.025 V7: A Comprehensive Guide
Before You Buy
- Decide which functions you need to work and which you will accept as decorative.
- Set a budget and stick to it. Multi function replicas climb in price fast.
- Confirm the seller offers QC photos of the exact unit, not stock images.
- Know your wrist size and the case diameter you can wear comfortably.
- Understand that owning or trading counterfeit watches carries legal risk in the United States.
Step by Step Inspection
- Ask the seller for the function list in writing, naming every subdial and aperture.
- Request close up photos of the dial at a slight angle so printing reflects light.
- Check the case diameter and thickness with calipers against the stated specs.
- Read the dial text under a loupe and look for fuzzy or doubled lettering.
- Verify the date, day, and month apertures sit centered and flush with the dial.
- Press the chronograph start pusher and confirm the central seconds hand sweeps without stutter.
- Press stop, then reset, and confirm every chronograph hand snaps back to zero.
- Advance the moon phase and confirm the disc turns and the aperture edge stays clean.
- Wind the crown slowly and feel for grit or slipping through the full power reserve.
- Inspect the caseback screws, engraving, and rotor clearance with the movement visible.
- Put the watch on a timegrapher and note the rate, amplitude, and beat error.
- Weigh the head and check that the bracelet or strap balance matches the case.
Complication Checks That Matter Most
Run the chronograph for a full ten minutes before you accept the watch. Cheap module movements drift or freeze when the seconds counter passes the thirty minute mark. Reset the chronograph at least five times in a row. A hand that lands a fraction off zero on the first reset will land further off on the fifth.
Test the calendar functions one step at a time. A perpetual calendar replica that jumps the date correctly at midnight is not the same as one that correctly skips a short month. Most builds do not skip months. If a seller claims yours does, ask for a video of the transition.
Common Flaws in This Build Class
- Moon phase discs that are printed rather than relief stamped.
- Subdial rings with uneven spacing between the hash marks.
- Pushers that sit too proud of the case or wobble when pressed.
- Crystal with a visible halo or weak anti reflective coating.
- Rotor that rubs the caseback when the watch is tilted.
- Clasp that opens under light wrist pressure.
Care After Purchase
Keep the watch away from steam, hot showers, and salt water regardless of any water resistance claim. Replicas are not tested to a published standard, so treat the gaskets as decorative. Wind a manual movement at the same time each day. Service an automatic movement every two to three years if you wear it daily, and stop the chronograph before storing the watch so the module rests.
Store it in a dry case with the crown pushed in and the pushers untouched. If the watch runs fast after a year, a local watchmaker can regulate most common movements for a modest fee, though many will decline to work on counterfeit goods.