A fake Pasha 366394 is a replica of the Cartier Pasha de Cartier, built to imitate the case and dial that carry that reference code. The number is the part worth understanding. Two watches sold under the same code can differ by a lot in movement, case finishing, and how the crown cap actually threads, so "fake Pasha 366394" describes a category, not one product.
What 366394 refers to
Cartier reference numbers identify a case and dial combination, and they usually show up on the caseback and in the guarantee booklet. They get reused across dial variants and bracelet options, which is why online spec sheets for a given Pasha code rarely agree with each other. If someone quotes you exact dimensions for 366394, treat it as a claim to check against Cartier paperwork or a watchmaker's calipers, not as settled fact.
The Pasha line itself launched in 1985 and was redesigned in 2020. The older architecture is what most replica buyers mean: a round case with Vendôme lugs, a screw-down crown cap tethered by a small chain, a sapphire cabochon in the crown, and four screws on the bezel on many variants. Get those four elements right and the watch reads as a Pasha from across a table.
What the real thing gets right
- The crown cap threads onto the case with a short, even turn and seats flush. No wobble, no gap at the seam.
- The chain has a specific hang. It sits close to the case and moves without kinking.
- Bezel screws are sized to the hole, with slots aligned and heads sitting just below the surface.
- Dial printing is thin and crisp under a loupe. The secret signature in the VII is there and not blurry.
- Applied numerals have a soft polish on the edges, not a mirror-bright bevel.
Where replicas slip
Three places, almost every time. The crown cap is the hardest part to machine cheaply, so low-tier copies use a push-fit cap or a chain that hangs wrong. Second is the bezel screws: look for heads that sit proud of the bezel or slots that do not line up. Third is the caseback engraving, which should be crisp and correctly spaced rather than shallow and rounded.
Dial details follow. Replica printing tends to be a touch heavier than genuine, and the cabochon is usually synthetic corundum of a slightly flatter blue than Cartier's sapphire. None of that is visible at arm's length.
Sorting the tiers
Most sellers work in three rough bands. Entry copies run quartz or a basic automatic, stamped cases, and printed dials. Mid tier adds a Swiss-style automatic, a properly threaded cap, and better dial work. The top band, usually marketed as 1:1, gets a clone or decorated movement, hand-finished case edges, and a cabochon that at least reads correctly in daylight. Price tracks those bands closely, and a quote far below the going rate for a given tier is the first thing I would question.
How I would check one before paying
- Ask for a video, not photos. Thread the crown cap on and off on camera.
- Get a straight-on dial shot and a macro of the printing near the VII.
- Ask which movement is inside and whether it hacks and hand-winds.
- Request a caseback photo with the reference and serial legible.
- Confirm what happens if it arrives with a misaligned bezel screw or a cap that binds.
Red flags and the legal side
Walk away from anyone who calls a replica genuine, refuses video, or pressures a fast payment outside a tracked method. In the US, selling counterfeit goods is illegal and shipments can be seized by customs, so understand the risk before you order. A replica Pasha is a replica. It is not a substitute for Cartier paperwork, and it should never be resold as an original.