What Is a Fake Planet Ocean Ultra Deep 6000m?
A fake Planet Ocean Ultra Deep 6000m is a replica of Omega's 2022 saturation-diving watch, built to resemble a genuine piece that sells for roughly $12,000 and up, at a small fraction of that cost. Replicas reproduce the 45.5 mm case shape, the domed sapphire crystal, the ceramic bezel insert, and the Ultra Deep dial text. They do not reproduce the Grade 5 titanium case, the Master Chronometer movement, or the 6,000 m pressure rating that defines the real watch.
What Makes the Genuine Ultra Deep Different?
Omega developed the Ultra Deep for Victor Vescovo's Five Deeps Expedition, and a prototype survived a 10,928 m dive in the Mariana Trench. The production model carries a 6,000 m (20,000 ft) rating tested under ISO 6425, the international standard for divers' watches. Reaching that depth requires a forged titanium case, a sapphire crystal with an internal pressure ring, and Manta lugs that eliminate spring bar failure points.
How Close Are the Replicas in Practice?
Case and dimensions
Most replicas sit within a millimeter of the 45.5 mm diameter, but thickness and weight usually run heavier because the case is 316L steel rather than titanium. Titanium-coated versions look closer in color but scratch differently. Lug geometry and crown guards are the areas where flaws show up most often.
Dial and bezel
Ceramic bezel inserts with lume pip and the gradient dial printing are usually convincing at arm's length. Close-up flaws include soft text edges, incorrect lume color, and a date window that sits slightly off-center. Bezel action on replicas is typically looser with more backplay than the genuine click.
Movement
Replicas run modified automatic movements, often a decorated 2824-style caliber rather than the coaxial Master Chronometer 8912. Power reserve, beat rate, and accuracy vary widely between batches. No replica movement has passed METAS Master Chronometer certification.
Water resistance
This is the largest gap. Replicas are usually pressure-tested only to around 30 to 100 m, and many are not tested at all. Treating a replica as a 6,000 m dive tool risks flooding the case and ruining the movement.
What Should You Inspect Before Buying?
- Ask for the actual measured case diameter, thickness, and weight.
- Request sharp, angled photos of the dial text, date window, and caseback engraving.
- Confirm the movement type and whether it has been regulated.
- Check bezel alignment at 12 o'clock and lume brightness.
- Verify the stated water resistance test result, if any.
How Much Do Replicas Cost?
Entry-level copies start near $80 and show obvious shortcuts in crystal clarity and finishing. Mid-tier versions around $200 to $400 offer better dial printing, sapphire glass, and smoother bracelets. Top-tier builds above $400 aim to match case finishing and movement decoration, still without the genuine watch's certification or depth rating.
Is Buying a Replica Legal?
Selling counterfeit watches is illegal in the United States and most of Europe, and importing them can lead to seizure and penalties. Buyers should also weigh service reality: replica movements are rarely supported by local watchmakers, and spare parts are hard to source. The genuine Ultra Deep remains the only version with a verifiable 6,000 m capability.