What Is a Replica Globemaster 7407?

The replica Globemaster 7407 is a copy of the Omega Globemaster, a Swiss watch known for its fluted bezel and pie-pan dial. The "7407" identifier refers to a specific production batch or factory version in the replica market. These replicas aim to mimic the original's 39mm case, domed sapphire crystal, and exhibition caseback. Quality ranges from low-grade to so-called 1:1 super clones.

Because no official replica exists, the term covers a spectrum of imitations. A good replica should match the genuine's dimensions, dial layout, and feel. However, even the best copies have tells.

Key Features to Check

  1. Case size and shape. The genuine Globemaster is 39mm in diameter and about 12.5mm thick. Measure the replica with calipers. Off sizes are a red flag.
  2. Bezel fluting. The fluted bezel should have crisp ridges with even spacing. Soft or shallow fluting indicates a cheap casting.
  3. Dial texture. The pie-pan dial has a raised center and a step down to the outer track. Look for correct font and date wheel alignment.
  4. Movement. Many replicas use a clone of the Omega 8900 or a decorated Miyota 9015. The rotor should spin free and the winding should feel smooth without grinding.
  5. Crystal and caseback. A domed sapphire with anti-reflective coating is standard. The caseback should have correct engravings and a sapphire window.
  6. Bracelet and clasp. The steel bracelet should have solid links and a signed clasp. Loose or rattly bracelets are common on low-end replicas.

Common Flaws in 7407 Replicas

  • Misaligned date window or cyclops magnifier.
  • Incorrect logo font or spacing on the dial.
  • Rough polished edges on the case and bracelet.
  • Movement noise or inaccurate timekeeping.
  • Wrong shade of blue or grey on the dial.

How to Assess Quality

Start with weight. A genuine Globemaster feels substantial. A lightweight replica often uses inferior alloys. Next, check the crown action. It should screw down and set the time without grinding. Then, inspect the dial under a loupe. Printing should be sharp, not fuzzy. Finally, verify the movement's beat rate. The genuine runs at 25,200 vph (3.5 Hz). Many replicas use 28,800 vph, which is a tell if you know the original.

Legal note: Buying or selling replica watches may violate trademark laws in your country. This guide is for informational purposes only.