The IW323720 is an industrial-design watch in the truest sense: a screw-set bezel, an integrated bracelet and a dial built for reading at a glance rather than for decoration. This 1:1 replica carries that same five-screw silhouette into a stainless steel case you can wear every day, with the finishing and proportions fans of the reference check first. Here is exactly what the piece delivers.
Key Features
- Five exposed bezel screws in the original layout, each properly seated and flush
- Integrated H-link bracelet with brushed outer links and mirror-polished centre links
- Automatic self-winding movement with sweeping seconds and a framed date window at 3 o'clock
- Flat sapphire crystal with interior anti-reflective coating
- Applied baton hour markers and hands with luminous fill for low-light legibility
- Screw-down crown and gasketed caseback for everyday water resistance
- Case diameter in the 42–44 mm range, matching the reference's substantial wrist presence
- Signed folding clasp with solid end links and a snug, rattle-free fit
Materials and Build
The case and bracelet are machined from 316L stainless steel, then hand-finished so the brushed surfaces stay directional and the polished bevels stay crisp rather than rounded. The dial sits under sapphire rather than mineral glass, set slightly proud of the bezel the way the original is. Inside, the automatic movement is regulated for a stable rate in daily use, and the caseback seals on a rubber gasket instead of a friction fit — a small detail that matters if the watch sees water, sweat and temperature swings.
Shipping and Returns
Orders ship within one business day in discreet, padded packaging, with tracking issued as soon as the parcel is scanned. Every watch is checked for rate, hand alignment and bracelet fit before it leaves. If the piece isn't right for you, returns are accepted within 30 days in unworn condition for a refund or exchange.
Is the IW323720 replica comfortable for daily wear?
Yes. The integrated bracelet curves to follow the wrist and the clasp sits flat underneath, so it wears closer than the case size suggests. It works as well under a cuff as it does with a t-shirt.
How faithful is it to the original reference?
Case proportions, bezel screw placement, dial layout and bracelet architecture all follow the original closely. The remaining differences are the kind you would only catch under a loupe or on the movement side.
Can I resize the bracelet myself?
Yes — the links are held by screw pins rather than friction pins, so a small screwdriver is all you need. Size it once, add a touch of thread-locker, and it stays put.