Quick answer

The 2020 Pasha de Cartier is a relaunch with 41mm and 35mm cases, a crown cap on a small chain, and Cartier's QuickSwitch strap system. A replica has to match those parts in shape and function, not just the dial logo. Check size, crown chain, dial print, strap hardware, and movement feel in that order.

What the 2020 Pasha changed

The 2020 model brought back the Pasha outline with a modern strap system and two core sizes. Key details below set the standard for any replica comparison.

  • Case sizes: 41mm and 35mm, with steel and gold versions.
  • Crown cap: a screw-down cover on a chain, set over the crown.
  • Dial: four large Arabic numerals, diamond hands, square minute track.
  • Strap system: QuickSwitch for tool-free strap changes.
  • Bracelet: SmartLink for link removal without a tool.
  • Movement: automatic 1847 MC in the 41mm line.
  • Water resistance: rated to 100m on the original.

Before you start

  • Use calipers, a 10x loupe, a timing app, and a soft strap tool.
  • Work on a cloth over a table so small parts do not bounce away.
  • Ask the seller for clear photos of the caseback, crown chain, and clasp.

How to check a replica Pasha 2020

  1. Measure the case with calipers. Confirm 41mm or 35mm across the case, then note thickness and lug-to-lug span.
  2. Inspect the crown cap and chain. The cap should sit flush and the chain should anchor at both ends without sharp edges.
  3. Check the dial with a 10x loupe. Confirm crisp Arabic numerals, even minute track print, and clean text spacing.
  4. Press the QuickSwitch tab and release the strap. Refit it and listen for a firm click.
  5. Test the SmartLink bracelet. Push the tabs, remove one link, refit it, and check for side play.
  6. Wind the crown and set the hands. The action should feel smooth, with no grinding or loose play.
  7. Time the movement over 24 hours on a flat surface. Record the rate and note any large position changes.
  8. Do not trust a water resistance claim without a pressure test. Keep the watch away from water until then.

Red flags

  • The crown chain feels light or sticks out from the case.
  • Dial text bleeds, numerals sit off center, or the minute track is uneven.
  • The cabochon is glued high or sits off axis.
  • QuickSwitch or SmartLink parts bind, rattle, or fail to lock.
  • The seller calls the watch genuine or refuses close-up photos.

Fit and care

Set the bracelet so one finger fits under the clasp. Wipe the case with a dry cloth after wear, keep the crown cap closed, and store the watch in a dry box. Have the gaskets checked before any water contact.