What Is a Replica Rolex 116610LV?
A replica Rolex 116610LV is a third-party copy of the green Submariner Date that Rolex produced from 2010 to 2020. Collectors call the original the "Hulk" because of its green ceramic bezel and green sunburst dial. Replicas range from cheap quartz look-alikes to high-end 1:1 builds that copy the 40mm case, the dial text, and the automatic movement.
Buyers pick this reference for one reason: the green. No other Submariner reads like it on a wrist. The copy market answers that demand with dozens of versions at very different quality levels.
The Real 116610LV: Specs Worth Knowing
Match any replica against the genuine specs before you spend money.
- Case: 40mm Oystersteel, about 12.5mm thick, 300m water resistance
- Bezel: green Cerachrom ceramic insert with platinum-coated numerals
- Dial: green sunburst finish, Maxi markers, Chromalight lume
- Movement: Rolex Caliber 3135, 28,800 vph, 48-hour power reserve
- Bracelet: Oyster with Glidelock clasp, 20mm lugs
- Production run: 2010 to 2020
116610LV vs 126610LV vs 16610LV
The 16610LV arrived in 2003 with a black dial and a green aluminum bezel. Collectors nicknamed the 116610LV the "Hulk" for its all-green face and bezel. The 2020 replacement, the 126610LV, went back to a black dial with a green bezel and grew to 41mm.
Why the Hulk Still Draws Attention
Rolex discontinued the 116610LV in 2020, and secondary prices climbed above retail for years afterward. That gap is the whole reason replica demand exists. A buyer who wants the green look without a five-figure outlay looks at the copy market instead.
Replica Tiers: What Your Money Pays For
Price tracks materials and movement, not the logo on the dial.
- Budget, $50 to $150: 316L steel, quartz or low-grade automatic, painted or printed bezel insert, flat green dial, hollow end links.
- Mid tier, $150 to $350: ETA 2824 or 2836 clone, ceramic bezel insert, correct case size, better dial finish.
- High tier, $350 and up: 904L steel cases, clone 3135 movements (SA3135, VR3135, VS3135), platinum-plated bezel markings, AR-coated cyclops, correct rehaut engraving.
What Separates a Good 116610LV Replica From a Bad One
Six details decide how the watch reads on a wrist.
- Bezel insert color. Genuine green shifts from deep olive indoors to brighter green in sunlight. Cheap inserts stay flat lime under any light.
- Dial sunburst. Light should rake across the dial and fade from a bright center to a dark edge.
- Rehaut engraving. "ROLEX" repeats around the inner ring and lines up with the hour markers.
- Cyclops and date. Magnification should sit near 2.5x with a centered date and correct font.
- Case shape. Crown guards should be thick and squared. Thin or pointy guards are a giveaway.
- Bracelet fit. End links should sit flush with the lugs, with no gaps and no rattle.
Movements Used in a Replica 116610LV
Most replicas run one of two movement families. ETA 2824 and 2836 clones power the mid tier and cost little to service. Clone 3135s copy the genuine layout, including crown height and winding direction, and are the choice for high-end builds.
Inside the 3135 clone group, the VS3135 and VR3135 rank above the older SA3135 for keyless works and long-term stability. A 2824 clone keeps better time for less money, but the stem height sits lower, which some buyers notice when setting the time.
None of these movements carry a Rolex service card. Any watchmaker who works on clones can handle a 2824. Fewer shops touch a 3135 clone.
Water Resistance and Everyday Wear
Do not swim with a replica unless a watchmaker pressure-tests it first. Gaskets, case-back threads, and crown seals vary by factory and by batch. A $400 copy is not a dive watch, whatever the case back says.
Sweat, sunscreen, and chlorine do the most damage to plated bezel markings. Rinse the case with fresh water after wear and dry it with a soft cloth.
Cost, Service, and Resale
Service on a 3135 clone runs higher than on a 2824 clone, and shops that accept the work are limited. Resale value on any replica sits near zero. Treat the purchase as a fashion expense, never as an investment.
Frequently Asked Questions
Is the replica Rolex 116610LV the same size as the original?
Top-tier replicas copy the 40mm case, 20mm lug width, and 12.5mm thickness. Budget versions often run larger or thicker, so measure before you buy.
Which movement is best for a replica 116610LV?
A VS3135 or VR3135 clone gives the correct crown height and winding feel. An ETA 2824 clone costs less to service and holds up well for everyday wear.
How much should a replica 116610LV cost?
Expect about $50 to $150 for a budget copy, $150 to $350 for mid tier, and $350 and up for a 904L case with a clone 3135 movement.
How can I tell a replica 116610LV from the real thing?
Check the bezel color shift, the rehaut engraving alignment, the date magnification, and the movement. A watchmaker can open the case back in minutes.
Does a replica 116610LV hold value?
No. Replicas lose most of their value as soon as they are worn. Genuine Hulks trade on the secondary market, and those prices move with supply.